Extreme Networks BlackDiamond 10808 Installation Guide Page 60

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 59
60 Extreme Networks BlackDiamond 10K-Series Switch Installation Guide
BlackDiamond 10808 I/O Modules
9 Store the module packaging for future use.
10 Leave the ESD strap permanently connected to the chassis so that it is always available when you
need to handle ESD-sensitive components.
To install additional I/O modules, repeat steps 1 through 6.
Verifying the I/O Module Installation
After you install an I/O module, verify that it is working correctly. Check the LEDs on the front panel
of the I/O module and use the command-line interface (CLI)
show slot <slot number> command to
display slot-specific information about the newly installed module.
LED Indicators
When the I/O module and its ports (if applicable) are configured and operating normally, the
front-panel LED indicators should appear as follows:
STATUS LED—green blinking
DIAG LED—off
Port status LED (per port):
The ARM and MPLS modules do not have external network interfaces (ports); therefore, there are no
port status LEDs on those modules.
Green
Amber blinking (all except ATM and PoS modules)
Amber blinking, returning to green (ATM and PoS modules only)
For more information about I/O module LED activity, see “I/O Module LEDs” on page 57.
Displaying Slot Status Information
Assuming the I/O module has no problems, the command show slot <slot> (where <slot> is the
number of the slot where you installed the module) displays information about the module including:
general information about the module (name, serial number, part number), the state of the module
(power down, operational, mismatch between the slot configuration and the module in the slot), and
the status of the ports on the module.
For more information about slot status information, see the ExtremeWare Software User Guide and the
ExtremeWare Command Reference Guide.
Page view 59
1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 87 88

Comments to this Manuals

No comments