Extreme Networks BlackDiamond 10808 Installation Guide download pdf (Page 55)

Configuring I/O Modules

Extreme Networks BlackDiamond 10K-Series Switch Installation Guide 55

G60X Module

Figure 16 shows the G60X module.

Figure 16: G60X module

The G60X module has 60 unpopulated Mini-GBIC-based Gigabit Ethernet fiber ports. If you have one

MSM module installed, all ports on the G60X module are switched through that MSM module. If you

have two MSM modules installed, the top 30 ports on the G60X module are switched through the MSM

module in slot A, and the bottom 30 ports are switched through the MSM module in slot B during

normal operation.

All Gigabit Ethernet ports on these modules use SPF fiber Mini-GBIC connectors and support

1000BASE-SX, 1000BASE-LX, 1000BASE-LX70, and 1000BASE-ZX.

The default configuration of the G60X module is as follows. All ports:

• Are added to the default VLAN as untagged

• Inherit the properties of the default VLAN (protocol type, VLANid, and so forth)

Mini-GBIC Ports

The G60X module supports any of the following Mini-GBICs:

• SX mini-GBIC, which conforms to the 1000BASE-SX standard

• LX mini-GBIC, which conforms to the 1000BASE-LX standard

• ZX mini-GBIC, which conforms to the IEEE 802.3z standard

EX_005

Module status LEDs

Mini-GBIC

ports

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 87 88

No comments

Extreme Networks BlackDiamond 10808 Installation Guide Page 55