Extreme Networks BlackDiamond 12804 User Manual download pdf (Page 153)

Connector Pinouts

BlackDiamond 12800 Series Switches Hardware Installation Guide

153

Connector Pinouts

Table 30 describes the pinouts for a DB-9 console plug connector.

Figure 87 shows the pinouts for a 9-pin to 25-pin (RS-232) null-modem cable.

Table 29: DC PS Model #65022 (325 W DC PSU)

For the BlackDiamond 12802 switch

Minimum configuration 2 power supplies

Full configuration 4 power supplies

Input Nominal input voltage: –48 V , –60 V , 15 A maximum

Operational voltage range: –40 V to –72 V

Maximum input amperages:

10 A @ –40 V (low-line)

8 A @ –48 V

7 A @ –60 V (high-line)

Maximum in-rush current: 8 A

Input circuit protection: 15 A

Wire harness provided by Extreme Networks with each power supply.

Extreme part number 4340-00028

Minimum wire size: 14 AWG (1.3 mm

) copper stranded

(pre-approved cord set for county of use)

Connector: Molex connector PN 42816-0312

Connector pins: Molex connector pins PN 42815-0032

Output DC Output:

48 V , 6 A/ 12 V

2.5 A/7 VSB 0.75 A

Output power (W): 325 W

Operating conditions Operating temperature: 0° C to 40° C

Storage temperature: –40° C to 70° C

Operating humidity: 10% to 90% relative humidity, non-condensing

Operational shock: 30 m/s

(3 g)

Table 30: Pinouts for the DB-9 Console Connector

Function Pin Number Direction

DCD (data carrier detect) 1 In

RXD (receive data) 2 In

TXD (transmit data) 3 Out

DTR (data terminal ready) 4 Out

GND (ground) 5 -

DSR (data set ready) 6 In

RTS (request to send) 7 Out

CTS (clear to send) 8 In

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 159 160

Comments to this Manuals

No comments

Extreme Networks BlackDiamond 12804 User Manual Page 153

Comments to this Manuals

Related products and manuals for Network switches Extreme Networks BlackDiamond 12804