Extreme Networks BlackDiamond 12804 User Manual Page 120

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 119
Replacing BlackDiamond 12800 Series Chassis Components
BlackDiamond 12800 Series Switches Hardware Installation Guide
120
Removing the Fan Tray
To remove a fan tray from the BlackDiamond 12804 switch:
1 Attach the ESD-preventive wrist strap to your wrist and connect the metal end to the ground
receptacle on the top-left corner of the switch chassis.
2 Locate the captive screws at the top and bottom of the fan tray.
3 Using a #2 Phillips screwdriver, loosen each captive screw as shown in Figure 77.
Figure 77: Removing the Fan Tray from the BlackDiamond 12804 Switch
4 Use the fan tray handle to pull the fan tray half-way out from the fan tray slot. This action
disconnects the fan tray from the switch power.
Wait for the fan blades to stop turning before continuing with this procedure.
WARNING!
Be sure that all fan blade motion has ceased before continuing to remove the fan tray.
5 Support the bottom of the fan tray with your free hand as you use the handle to slide the fan tray
completely out from the fan tray slot.
CAUTION
Be sure that both hands are used to support the weight of the fan tray during removal.
Leave the ESD-preventive wrist strap permanently connected to the switch so that it is always available
when you need to touch ESD-sensitive components.
EX_114
Fan tray
handle
Fan tray
captive
screws (x2)
Page view 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 159 160

Comments to this Manuals

No comments