Extreme Networks Altitude 4511 Installation Guide download pdf (Page 15)

Telco Box Installation

Altitude™ 4511 Access Point Installation Guide

2 Snap out keystone connectors from the existing plate.

3 Gently pull some cable out of the wall so it can be used with the Altitude 4511 Access

Point.

4 Attach the metal mounting plate (shipped with the Altitude 4511 Access Point) to an

existing standard Telco in-wall box.

The screws used to mount the bracket to the Telco Box are customer provided. You can

use the same screws that covered the existing wall plate if necessary.

Mount the bracket to the wall so the Telco Box is hidden behind the mounting plate.

5 Remove the blank plug before installing the RJ11 into the snap-in port.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

No comments

Extreme Networks Altitude 4511 Installation Guide Page 15