Extreme Networks Summit WM Series Specifications download pdf (Page 13)

Extreme Networks: Summit WM 100, 1000 Wireless Controllers with Altitude 350-2 APs

PN: 1725-36069-001_C.doc

Setting up SSID, Security and QOS

1. Click the WM-AD Configuration button

2. Click the

Topology tab.

3. Assign a subnet for clients for a specific SSID.

4. Under

DHCP Settings:

a. Enter the appropriate address for the

Gateway.

b. For

Mask enter 255.255.255.0.

c. The address range should default to

192.168.121.2 –

192.168.121.254. Change this if you want a limited range of

addresses assigned to this subnet.

d. No

DNS Servers or WINS is required.

5. Set the

Timeout Idle: pre and post to 2.

6. Under

Next Hop Routing, set the OSPF Route Cost to 50000.

7. Enter an

SSID name.

8. Under

Altitude™ APs, select the b/g check box for each AP.

9. Click the

Save button.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

No comments

Extreme Networks Summit WM Series Specifications Page 13